Issue 12, 2018

Selective-area lateral epitaxial overgrowth of SiC by controlling the supersaturation in sublimation growth

Abstract

We realized the selective-area lateral epitaxial overgrowth of SiC on a 6H-SiC (0001) seed crystal by controlling the supersaturation in sublimation growth. For crystal growth from the vapor phase, the nucleation and growth rate of SiC crystals are critically dependent on supersaturation. Non-uniformity of the supersaturation over the 6H-SiC seed surface was effectively controlled by modulating the thermal profile through forming a predefined pattern of different thermal conductivity distributions on the backside of the seed. Localized nucleation and growth due to high supersaturation started at the lower temperature regions corresponding to higher thermal conductivity on the backside of the seed, subsequently followed by the lateral growth of 6H-SiC from the sidewalls of the preferential growth regions to the higher temperature regions corresponding to lower thermal conductivity. It was found that the piling up of dislocation etch pits repeats the arrangement and boundaries of the predefined pattern, and the free lateral growth was accompanied by a sharp decrease in the density of threading dislocation. This may be a promising technique for obtaining high-quality SiC crystals with low threading dislocation density.

Graphical abstract: Selective-area lateral epitaxial overgrowth of SiC by controlling the supersaturation in sublimation growth

Article information

Article type
Paper
Submitted
25 Nov 2017
Accepted
07 Feb 2018
First published
07 Feb 2018

CrystEngComm, 2018,20, 1705-1710

Selective-area lateral epitaxial overgrowth of SiC by controlling the supersaturation in sublimation growth

X. Yang, X. Chen, Y. Peng, X. Hu and X. Xu, CrystEngComm, 2018, 20, 1705 DOI: 10.1039/C7CE02036H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements