Issue 40, 2018

Crystal engineering by tuning the growth kinetics of GaN 3-D microstructures in SAG-HVPE

Abstract

The growth of GaN 3-D microstructures is investigated by SAG-HVPE. Capitalizing on the properties of this kinetically-controlled process, the main experimental parameters and physical mechanisms that control the shaping of 3D GaN prisms and pyramids in SAG-HVPE are highlighted. Growth experiments performed on N-polar AlN/Si(100) and Ga-polar GaN/Si(111) substrates also provide insight into how to switch from a pyramid to a prismatic shape for a given substrate polarity. The aspect ratio of GaN rods could be tuned by playing with the HCl partial pressure additionally introduced during growth. The influence of both mass transport and surface kinetics is discussed, as the crystal growth rate varies with increasing surface area as time goes by. Ammonia treatment prior to the growth, aimed at blocking the r planes thanks to H2 passivation, is proposed to tune the morphology of the GaN rods. Raman spectroscopy performed on individual GaN rods shows no relevant strain field and no structural differences between the rods and state-of-the-art bulk GaN.

Graphical abstract: Crystal engineering by tuning the growth kinetics of GaN 3-D microstructures in SAG-HVPE

Article information

Article type
Paper
Submitted
17 Jul 2018
Accepted
10 Sep 2018
First published
10 Sep 2018

CrystEngComm, 2018,20, 6207-6213

Crystal engineering by tuning the growth kinetics of GaN 3-D microstructures in SAG-HVPE

G. Avit, M. Zeghouane, Y. André, D. Castelluci, E. Gil, S. Baé, H. Amano and A. Trassoudaine, CrystEngComm, 2018, 20, 6207 DOI: 10.1039/C8CE01177J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements