Issue 30, 2018

Corrosion inhibition performance of newly synthesized 5-alkoxymethyl-8-hydroxyquinoline derivatives for carbon steel in 1 M HCl solution: experimental, DFT and Monte Carlo simulation studies

Abstract

Three new organic compounds primarily based on 8-hydroxyquinoline have been successfully synthesized and characterized via different spectroscopic methods (FTIR, 1H, and 13C NMR). The synthesized compounds, namely 5-propoxymethyl-8-hydroxyquinoline (PMHQ), 5-methoxymethyl-8-hydroxyquinoline (MMHQ) and 5-hydroxymethyl-8-hydroxyquinoline (HMHQ), were evaluated as corrosion inhibitors for carbon steel in 1 M HCl solution using electrochemical impedance spectroscopy, potentiodynamic polarization and weight loss measurements at 298 K. Electrochemical measurements confirmed that the newly synthesized 5-alkoxymethyl-8-hydroxyquinoline derivatives are mixed type corrosion inhibitors and confirmed maximum protection efficiencies of 94, 89 and 81% for PMHQ, MMHQ, and HMHQ, respectively, at the optimum concentration of 10−3 M. The EIS spectra confirmed a slightly depressed semi-circle profile with a single time constant in Bode diagrams for the three organic compounds over the whole concentration and temperature ranges studied. The adsorption of PMHQ, MMHQ, and HMHQ on the carbon steel surface followed the Langmuir adsorption isotherm. In addition, the kinetic and thermodynamic parameters for carbon steel corrosion and inhibitor adsorption, respectively, were determined and discussed. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses supported the formation of a protective film on carbon steel in the presence of PMHQ, MMHQ, and HMHQ. Density functional theory calculations (DFT) showed that the effectiveness of the inhibitive actions of the studied compounds correlates well with their electron donating ability, whilst Monte Carlo simulations revealed that the extent and favourability of adsorption of inhibitor molecules on the carbon steel surface establish their corrosion inhibition performances.

Graphical abstract: Corrosion inhibition performance of newly synthesized 5-alkoxymethyl-8-hydroxyquinoline derivatives for carbon steel in 1 M HCl solution: experimental, DFT and Monte Carlo simulation studies

Article information

Article type
Paper
Submitted
21 May 2018
Accepted
11 Jul 2018
First published
11 Jul 2018

Phys. Chem. Chem. Phys., 2018,20, 20167-20187

Corrosion inhibition performance of newly synthesized 5-alkoxymethyl-8-hydroxyquinoline derivatives for carbon steel in 1 M HCl solution: experimental, DFT and Monte Carlo simulation studies

M. El Faydy, R. Touir, M. Ebn Touhami, A. Zarrouk, C. Jama, B. Lakhrissi, L. O. Olasunkanmi, E. E. Ebenso and F. Bentiss, Phys. Chem. Chem. Phys., 2018, 20, 20167 DOI: 10.1039/C8CP03226B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements