Issue 9, 2018

Palladium islands on iron oxide nanoparticles for hydrodesulfurization catalysis

Abstract

A four-fold increase in palladium (Pd) mass-based hydrodesulfurization (HDS) activity was achieved by depositing Pd species as nanosized islands on 12 nm colloidal iron oxide (FeOx) nanoparticles via the galvanic exchange reaction. The highest palladium dispersion was obtained at an optimal Pd/Fe molar ratio of 0.2, which decreased when the ratio increased. The improved dispersion was responsible for the enhanced catalytic activity per the total Pd amount in the HDS of 4,6-dimethyldibenzothiophene at 623 K and 3 MPa as compared to the iron-free Pd/Al2O3 catalyst. The lattice strain and modified electronic properties of the Pd islands suppressed deep hydrogenation to dimethylbicyclohexyl and changed the hydrocracking product distribution. Pd nanoparticles deposited on commercial Fe2O3 did not provide such an activity enhancement and catalyzed significant cracking. This study demonstrates that FeOx@Pd structures are a possible alternative to monometallic Pd catalysts with enhanced noble metal atom efficiency for ultra-deep HDS catalysis and points to their great potential to reduce the catalyst cost and move towards more earth-abundant catalytic materials.

Graphical abstract: Palladium islands on iron oxide nanoparticles for hydrodesulfurization catalysis

Supplementary files

Article information

Article type
Paper
Submitted
13 Jan 2018
Accepted
24 Mar 2018
First published
26 Mar 2018

Catal. Sci. Technol., 2018,8, 2323-2332

Palladium islands on iron oxide nanoparticles for hydrodesulfurization catalysis

A. Mansouri and N. Semagina, Catal. Sci. Technol., 2018, 8, 2323 DOI: 10.1039/C8CY00088C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements