Issue 1, 2018

Time-dependent transport characteristics of graphene tuned by ferroelectric polarization and interface charge trapping

Abstract

Graphene-based field effect transistors (FETs) were fabricated by employing ferroelectric Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) as a gate insulator. The co-existing effects of ferroelectric gating and interface charge trapping on the transport properties of graphene were investigated with respect to the FET structure. The sheet resistance (Rs) of graphene shows a slight decay under a small applied voltage, which is much less than the coercive voltage of the ferroelectric PMN-PT, suggesting non-negligible charge trapping effects. Moreover, when the applied voltage is increased up to a value larger than the coercive voltage, Rs exhibits three states: an initial rapid change, followed by a slow nearly exponential evolution, and finally a saturated state either during the applied voltage is retained or after it is released. In particular, a high-resistance state is finally reached due to the ferroelectric gating, implying that ferroelectric effects dominate this process. The underlying physical mechanism was fully investigated to effectively address the observed evolution of time-dependent Rs. Such a finding provides us an opportunity to understand the co-existing effects of ferroelectric gating and charge trapping and tune the transport properties of graphene through the interface effects.

Graphical abstract: Time-dependent transport characteristics of graphene tuned by ferroelectric polarization and interface charge trapping

Article information

Article type
Paper
Submitted
31 Aug 2017
Accepted
22 Nov 2017
First published
22 Nov 2017

Nanoscale, 2018,10, 328-335

Time-dependent transport characteristics of graphene tuned by ferroelectric polarization and interface charge trapping

W. Jie and J. Hao, Nanoscale, 2018, 10, 328 DOI: 10.1039/C7NR06485C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements