Issue 37, 2018

Fibrous strain sensor with ultra-sensitivity, wide sensing range, and large linearity for full-range detection of human motion

Abstract

It is challenging to construct exquisite microstructures for integrating extraordinary sensitivity, wide strain range detectability, low hysteresis, good linearity, and excellent reliability and stability in a single type of strain sensor. In this paper, we report a high-performance fibrous strain sensor with ultrahigh sensitivity (gauge factor up to 350), wide sensing range (0.1% to 150% strain), low hysteresis, good linearity over a large strain range (up to 50%), and excellent reliability and stability (>2000 cycles). Our fibrous strain sensor exhibits superior comprehensive properties to previous strain sensors, attributed to its hierarchical microstructure composed of twisted polyurethane fibers and microcracked poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) sensing layer on each fiber, bridged by carbon nanotube agglomerates. This sensor is attractive and promising for the full-range detection of human motion from subtle deformations to large movements. In addition, the spatial extensional strain distribution of human skin can also be detected by the sensing fabric woven by this fibrous sensor due to its knittability.

Graphical abstract: Fibrous strain sensor with ultra-sensitivity, wide sensing range, and large linearity for full-range detection of human motion

Supplementary files

Article information

Article type
Communication
Submitted
05 Jul 2018
Accepted
23 Aug 2018
First published
24 Aug 2018

Nanoscale, 2018,10, 17512-17519

Fibrous strain sensor with ultra-sensitivity, wide sensing range, and large linearity for full-range detection of human motion

H. Wu, Q. Liu, H. Chen, G. Shi and C. Li, Nanoscale, 2018, 10, 17512 DOI: 10.1039/C8NR05404E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements