Issue 13, 2018, Issue in Progress

Effects of calcination and reduction temperature on the properties of Ni-P/SiO2 and Ni-P/Al2O3 and their hydrodenitrogenation performance

Abstract

A series of SiO2-supported and γ-Al2O3-supported nickel phosphides were prepared by temperature-programmed reduction (TPR) with different calcination and reduction temperatures. The prepared catalysts were characterized by XRD, BET, H2-TPR, CO titration and HRTEM. The crystal phase and CO uptake content were influenced by calcination and reduction temperature. The catalytic performance of various catalysts was tested in quinoline hydrodenitrogenation and exhibited considerable differences. The quinoline HDN activity of SiO2-supported nickel phosphides decreases with increase of calcination and reduction temperature. In contrast to SiO2-supported samples, the ability to remove nitrogen of γ-Al2O3-supported samples increases with reduction temperature.

Graphical abstract: Effects of calcination and reduction temperature on the properties of Ni-P/SiO2 and Ni-P/Al2O3 and their hydrodenitrogenation performance

Supplementary files

Article information

Article type
Paper
Submitted
29 Oct 2017
Accepted
06 Feb 2018
First published
12 Feb 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 6745-6751

Effects of calcination and reduction temperature on the properties of Ni-P/SiO2 and Ni-P/Al2O3 and their hydrodenitrogenation performance

M. Shao, H. Cui, S. Guo, L. Zhao and Y. Tan, RSC Adv., 2018, 8, 6745 DOI: 10.1039/C7RA11907K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements