Issue 28, 2018, Issue in Progress

Detection of anti-p53 autoantibodies in saliva using microfluidic chips for the rapid screening of oral cancer

Abstract

Autoantibodies have high specificity and stability and are easy to detect. Anti-p53 autoantibodies can be used as biomarkers for the early detection of oral cancer. However, most studies detected anti-p53 in sera samples. In this study, a microfluidic chip combined with magnetic immunoassay, which can automatically detect the concentration of anti-p53 in saliva, was developed. The use of a micromixer can shorten the immunoassay time: the mixing time of the antigen and antibody can be reduced from the original 60 min off-chip to 20 min, making the total immunoassay time around 60 min. A method of moving magnetic beads and the antibody instead of manipulating fluid was utilized to simplify fluid control and decrease contamination caused by non-specific protein adsorption to the surface of reaction wells. The detection limit of anti-p53 was 4 ng mL−1. In addition, a relative concentration of anti-p53 in the saliva of patients was detected in the chip.

Graphical abstract: Detection of anti-p53 autoantibodies in saliva using microfluidic chips for the rapid screening of oral cancer

Supplementary files

Article information

Article type
Paper
Submitted
29 Dec 2017
Accepted
19 Apr 2018
First published
24 Apr 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 15513-15521

Detection of anti-p53 autoantibodies in saliva using microfluidic chips for the rapid screening of oral cancer

Y. Lin, C. Wu, Y. Peng, C. Wu, Y. Chang and K. Chang, RSC Adv., 2018, 8, 15513 DOI: 10.1039/C7RA13734F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements