Issue 14, 2018, Issue in Progress

In situ synthesis and electronic transport of the carbon-coated Ag@C/MWCNT nanocomposite

Abstract

A nanocomposite of Ag@C nanocapsules dispersed in a multi-walled carbon nanotube (MWCNT) matrix was fabricated in situ by a facile arc-discharge plasma approach, using bulk Ag as the raw target and methane gas as the carbon source. It was found that the Ag@C nanocapsules were ∼10 nm in mean diameter, and the MWCNTs had 17–32 graphite layers in the wall with a thickness of 7–10 nm, while a small quantity of spherical carbon cages (giant fullerenes) were also involved with approximately 20–30 layers of the graphite shell. Typical dielectric behavior was dominant in the electronic transport of Ag@C/MWCNT nanocomposites; however, this was greatly modified by metallic Ag cores with respect to pure MWCNTs. A temperature-dependent resistance and IV relationship provided evidence of a transition from Mott–David variable range hopping [ln ρ(T) ∼ T−1/4] to Shklovskii–Efros variable range hopping [ln ρ(T) ∼ T−1/2] at 5.4 K. A Coulomb gap, ΔC ≈ 0.05 meV, was obtained for the Ag@C/MWCNT nanocomposite system.

Graphical abstract: In situ synthesis and electronic transport of the carbon-coated Ag@C/MWCNT nanocomposite

Article information

Article type
Paper
Submitted
04 Jan 2018
Accepted
30 Jan 2018
First published
15 Feb 2018
This article is Open Access
Creative Commons BY license

RSC Adv., 2018,8, 7450-7456

In situ synthesis and electronic transport of the carbon-coated Ag@C/MWCNT nanocomposite

D. Wang, D. Li, J. Muhammad, Y. Zhou, Z. Wang, S. Lu, X. Dong and Z. Zhang, RSC Adv., 2018, 8, 7450 DOI: 10.1039/C8RA00078F

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements