Issue 42, 2018, Issue in Progress

Tribological properties of synthetic base oil containing polyhedral oligomeric silsesquioxane grafted graphene oxide

Abstract

The dispersion of graphene-based materials in lubricating oil is a prerequisite for improving its friction and wear performance. In this study, polyhedral oligomeric silsesquioxane (POSS) grafted graphene oxide (GO) was synthesized with an aim to improve the dispersibility of graphene in synthetic base oil. The composition and morphology of POSS-GO conjugates were characterized by FTIR, XPS, Raman spectroscopy, TEM and SPM. The tribological behavior of base oil with various concentrations of POSS-GO were examined using a UMT-3 friction and wear tester, and the worn surfaces were analyzed using Raman spectroscopy. It was found that concentrations of POSS-GO additives in the base oil is an important aspect for decreasing the friction and wear of the lubricated solid contacts. At lower and higher concentrations of POSS-GO, the lubricating effect is not effective or even worse. In contrast, at optimized concentration of POSS-GO, graphene sheets could form a boundary tribofilm between the contact, resulting in reduction of the friction coefficient and wear.

Graphical abstract: Tribological properties of synthetic base oil containing polyhedral oligomeric silsesquioxane grafted graphene oxide

Article information

Article type
Paper
Submitted
29 May 2018
Accepted
20 Jun 2018
First published
28 Jun 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 23606-23614

Tribological properties of synthetic base oil containing polyhedral oligomeric silsesquioxane grafted graphene oxide

B. Yu, K. Wang, Y. Hu, F. Nan, J. Pu, H. Zhao and P. Ju, RSC Adv., 2018, 8, 23606 DOI: 10.1039/C8RA04593C

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements