Issue 64, 2018, Issue in Progress

Light-soaking free organic photovoltaic devices with sol–gel deposited ZnO and AZO electron transport layers

Abstract

This paper investigates light-soaking effects in inverted organic photovoltaic (OPV) devices with zinc oxide (ZnO) and aluminum doped ZnO (AZO) electron transport layers (ETL), which is important for the development of low-cost and stable solar cells. The samples demonstrated high solar harvesting properties with power conversion efficiency up to 3.9%. Air-stability tests of up to 150 days were performed on devices with different Al doping levels. The devices maintained higher than 60% of the initial PCE after 50 days of open-air exposure. The light-soaking mechanism was investigated with experiments and simulations and shown to be eliminated when the Al fraction of the AZO is higher than 4%. The simulated band diagram of the OPV devices indicates that the low carrier density in the ZnO layer by virtue of depletion is the main reason of the light-soaking effect. Doping the ZnO layer as well as exposing the devices under UV irradiation will introduce additional free carriers into the ETL and reduce the width of the depletion region at both sides of the ETL.

Graphical abstract: Light-soaking free organic photovoltaic devices with sol–gel deposited ZnO and AZO electron transport layers

Supplementary files

Article information

Article type
Paper
Submitted
23 Aug 2018
Accepted
24 Oct 2018
First published
30 Oct 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 36542-36548

Light-soaking free organic photovoltaic devices with sol–gel deposited ZnO and AZO electron transport layers

Z. Jiang, S. Soltanian, B. Gholamkhass, A. Aljaafari and P. Servati, RSC Adv., 2018, 8, 36542 DOI: 10.1039/C8RA07071G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements