Issue 37, 2018

All-carbon lithium capacitor based on salt crystal-templated, N-doped porous carbon electrodes with superior energy storage

Abstract

In the pursuit of a lithium ion capacitor (LIC) with higher energy density and lower cost, the all-carbon symmetric-like LIC (ACS-LIC) has recently risen to prominence. In this article, we report a successful example of ACS-LIC synthesized by constructing both anode and cathode with one designed porous carbon material, prepared by a one-pot method and the cheap precursor methyl cellulose. By employing the salt crystal templates and N-doping, the as-obtained materials possess a unique interconnected porous carbon network with hierarchical pores and abundant active sites, showing low internal resistance, good wettability, high conductivity, and rich pseudocapacitance. The resultant NPC//NPC ACS-LIC device exhibited outstanding energy-power characteristics. Even at the super-large power density of 66 000 W kg−1, it can still achieve a high energy density of 70 W h kg−1. More importantly, the NPC//NPC ACS-LIC device demonstrates state-of-the-art cycling performance. After 10 000 cycles at 2 A g−1, the performance is retained at nearly 100%; even when tested at 10 A g−1, the device can still deliver 80.0% retention after 20 000 cycles, with only 0.001% fading per cycle, which is superior or at least comparable to the current state-of-the-art LICs.

Graphical abstract: All-carbon lithium capacitor based on salt crystal-templated, N-doped porous carbon electrodes with superior energy storage

Supplementary files

Article information

Article type
Paper
Submitted
27 Jun 2018
Accepted
29 Aug 2018
First published
30 Aug 2018

J. Mater. Chem. A, 2018,6, 18276-18285

All-carbon lithium capacitor based on salt crystal-templated, N-doped porous carbon electrodes with superior energy storage

Y. Cui, W. Liu, Y. Lyu, Y. Zhang, H. Wang, Y. Liu and D. Li, J. Mater. Chem. A, 2018, 6, 18276 DOI: 10.1039/C8TA06184J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements