Issue 20, 2018

Effect of annealing conditions on the electrical properties of ALD-grown polycrystalline BiFeO3 films

Abstract

An investigation of the influence of annealing conditions on the carrier transport, leakage current and dielectric properties of ALD-grown amorphous Bi–Fe–O thin films after their crystallization into BiFeO3 is presented. Whereas the interface-limited Schottky emission mechanism is dominant in 70 nm thick Fe-rich films after relatively short annealing, a space-charge-limited conduction mechanism is dominant in stoichiometric films with a thickness of 215 nm independent of the annealing conditions. Interestingly, prolonged annealing of the thin films also results in space charge limited conduction. Analysis of the changes in dielectric properties, on one hand, and the film composition, microstructure and morphology, on the other hand, reveal the key role of grain boundary interfaces for the conductivity of the polycrystalline ALD-grown BiFeO3 thin films. Extended annealing in oxygen results in 2–3 orders-of-magnitude reduction in leakage current accompanied by decreases in dielectric loss, highlighting the importance of optimizing annealing conditions for any applications of BiFeO3 thin films.

Graphical abstract: Effect of annealing conditions on the electrical properties of ALD-grown polycrystalline BiFeO3 films

Supplementary files

Article information

Article type
Paper
Submitted
14 Dec 2017
Accepted
16 Apr 2018
First published
11 May 2018

J. Mater. Chem. C, 2018,6, 5462-5472

Author version available

Effect of annealing conditions on the electrical properties of ALD-grown polycrystalline BiFeO3 films

I. S. Golovina, M. Falmbigl, A. V. Plokhikh, T. C. Parker, C. Johnson and J. E. Spanier, J. Mater. Chem. C, 2018, 6, 5462 DOI: 10.1039/C7TC05755E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements