Issue 25, 2018

High responsivity and low dark current nonpolar GaN-based ultraviolet photo-detectors

Abstract

The nonpolar a-plane and m-plane of GaN are anisotropic due to the fact that in-plane stresses of nonpolar GaN along different directions are varied, which is considered to be the reason why they are chosen for the preparation of polarization-sensitive ultraviolet (UV) photo-detectors (PDs), etc., when compared to polar c-plane GaN-based UV PDs. However, the nonpolar GaN-based UV PDs suffer from poor-quality GaN epitaxial films, which limit their performance enhancement. Herein, we report the fabrication of high responsivity and low dark current nonpolar a-plane GaN-based metal-semiconductor–metal (MSM) UV PDs, by using high-quality a-plane GaN epitaxial films grown on r-plane sapphire substrates through control of the dislocation density. The ∼2.5 μm-thick GaN epitaxial films were grown by the combination of low-temperature pulsed laser deposition and high-temperature metal–organic chemical deposition technologies and were then fabricated into MSM UV PDs. The MSM UV PDs were revealed to have a high responsivity of 0.74 A W−1 and a low dark current of 1.3 nA at an applied bias of 2 V, as well as a very small full-width at half-maximum for GaN(11-20) of 360 arcsec. The performance is better than the results for all of the nonpolar GaN-based MSM UV PDs ever reported. These UV PDs shed light on the potential for wide applications.

Graphical abstract: High responsivity and low dark current nonpolar GaN-based ultraviolet photo-detectors

Supplementary files

Article information

Article type
Communication
Submitted
11 May 2018
Accepted
04 Jun 2018
First published
05 Jun 2018

J. Mater. Chem. C, 2018,6, 6641-6646

High responsivity and low dark current nonpolar GaN-based ultraviolet photo-detectors

W. Wang, Z. Yang, Z. Lu and G. Li, J. Mater. Chem. C, 2018, 6, 6641 DOI: 10.1039/C8TC02281J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements