Issue 42, 2018

Ultraviolet electroluminescence from a n-ZnO film/p-GaN heterojunction under both forward and reverse bias

Abstract

ZnO film was fabricated on p-GaN film using the molecular beam epitaxy technique to form heterojunction light emitting diodes (LEDs). The devices exhibited strong light emission under both forward and reverse bias. The origin of different luminescence peaks has been investigated by comparing electroluminescence (EL) and photoluminescence spectra. When a forward bias is applied to the device, intense ultraviolet emission at ∼376 nm originating from ZnO rather than GaN can be observed, which is associated with the larger hole mobility of p-GaN than the electron mobility of n-ZnO. Under the reverse bias, the device shows broad emission at 520 nm originating from deep level-related recombination in ZnO, emission at 430 nm from GaN, 376 nm from ZnO and weak emission at 408 nm from the interface with a lower injection current of 10 mA. As the injection reverse current increases to 20 mA, the EL emission at 376 nm exhibits a dramatic increase in intensity without a peak shift. The emission mechanism of the heterojunction LED is discussed in terms of interface states and energy band theory. Our findings in this work provide an innovative path for the design and development of ZnO-based ultraviolet diodes.

Graphical abstract: Ultraviolet electroluminescence from a n-ZnO film/p-GaN heterojunction under both forward and reverse bias

Article information

Article type
Paper
Submitted
06 Sep 2018
Accepted
06 Oct 2018
First published
08 Oct 2018

J. Mater. Chem. C, 2018,6, 11368-11373

Ultraviolet electroluminescence from a n-ZnO film/p-GaN heterojunction under both forward and reverse bias

Q. Ai, K. Liu, H. Ma, J. Yang, X. Chen, B. Li and D. Shen, J. Mater. Chem. C, 2018, 6, 11368 DOI: 10.1039/C8TC04507K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements