Issue 2, 2019

A single light spot GC detector employing localized surface plasmon resonance of porous Au@SiO2 nanoparticle multilayer

Abstract

This paper describes the synthesis of a nano-porous multilayered film consisting of Au@SiO2 nanoparticles. This film was used to miniaturize the size of a localized surface plasmon resonance (LSPR)-based capillary gas chromatograph (GC) detector. A layer-by-layer (LbL) approach with proper surface reaction sequences was used to create a multilayer structure that consisted of as many as five layers of Au@SiO2 nanoparticles. The center wavelength of LSPR was shifted from 520 to 634 nm due to the approximation of additional layers of nanoparticles. The vapor response time for this Au@SiO2 multilayer LSPR sensor was identical to that of an Au nanoparticle monolayer, which confirmed that this multilayer structure has a high level of gas permeability. The multilayer was synthesized inside a glass capillary for use as a GC detector. Due to the enhancement of absorbance, the gas chromatographic signal was obtained via a single spotlight that penetrated one side of the glass capillary and was then reflected by a silver mirror coated on the opposite side. The detection limits were ≤20 ng for cyclohexanone and m-xylene.

Graphical abstract: A single light spot GC detector employing localized surface plasmon resonance of porous Au@SiO2 nanoparticle multilayer

Supplementary files

Article information

Article type
Paper
Submitted
08 Oct 2018
Accepted
29 Nov 2018
First published
30 Nov 2018

Analyst, 2019,144, 698-706

A single light spot GC detector employing localized surface plasmon resonance of porous Au@SiO2 nanoparticle multilayer

P. Lin, G. Le, Wei-I. Chiu, R. Jian and C. Lu, Analyst, 2019, 144, 698 DOI: 10.1039/C8AN01921E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements