Issue 20, 2019

A carob-inspired nanoscale design of yolk–shell Si@void@TiO2-CNF composite as anode material for high-performance lithium-ion batteries

Abstract

Silicon (Si) is an attractive anode material for lithium-ion batteries due to its high gravimetric and volumetric capacity. However, the challenges for Si anodes are low conductivity, unstable solid electrolyte interphase (SEI) layer and big volume expansion during the charge/discharge process. Inspired by the structure of carob, we propose a yolk–shell structured Si anode which tackles all the problems mentioned above. The non-filling Si clusters protected by atomic layer-deposited TiO2 are embedded in highly conductive one-dimensional carbon nanofibers, which leaves enough space for the expansion and contraction of Si during lithiation/delithiation. Moreover, the SEI layer will form at the outer surface of carbon nanofibers instead of on individual Si nanoparticles and can remain stable and spatially confined. Therefore, the yolk–shell composite electrode exhibits good electrochemical performance and reversible capacities of 1156 mA h g−1 at a current density of 600 mA g−1 after 500 cycles and 485 mA h g−1 at the current density of 9600 mA g−1 after 2000 cycles are obtained.

Graphical abstract: A carob-inspired nanoscale design of yolk–shell Si@void@TiO2-CNF composite as anode material for high-performance lithium-ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
15 Mar 2019
Accepted
11 Apr 2019
First published
11 Apr 2019

Dalton Trans., 2019,48, 6846-6852

A carob-inspired nanoscale design of yolk–shell Si@void@TiO2-CNF composite as anode material for high-performance lithium-ion batteries

C. Zhang, J. Yang, H. Mi, Y. Li, P. Zhang and H. Zhang, Dalton Trans., 2019, 48, 6846 DOI: 10.1039/C9DT01130G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements