Issue 9, 2019

A low Schottky barrier height and transport mechanism in gold–graphene–silicon (001) heterojunctions

Abstract

The interface resistance at metal/semiconductor junctions has been a key issue for decades. The control of this resistance is dependent on the possibility to tune the Schottky barrier height. However, Fermi level pinning in these systems forbids a total control over interface resistance. The introduction of 2D crystals between semiconductor surfaces and metals may be an interesting route towards this goal. In this work, we study the influence of the introduction of a graphene monolayer between a metal and silicon on the Schottky barrier height. We used X-ray photoemission spectroscopy to rule out the presence of oxides at the interface, the absence of pinning of the Fermi level and the strong reduction of the Schottky barrier height. We then performed a multiscale transport analysis to determine the transport mechanism. The consistency in the measured barrier height at different scales confirms the good quality of our junctions and the role of graphene in the drastic reduction of the barrier height.

Graphical abstract: A low Schottky barrier height and transport mechanism in gold–graphene–silicon (001) heterojunctions

Supplementary files

Article information

Article type
Communication
Submitted
21 Jun 2019
Accepted
25 Jul 2019
First published
27 Jul 2019
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2019,1, 3372-3378

A low Schottky barrier height and transport mechanism in gold–graphene–silicon (001) heterojunctions

J. Courtin, S. Le Gall, P. Chrétien, A. Moréac, G. Delhaye, B. Lépine, S. Tricot, P. Turban, P. Schieffer and J. Le Breton, Nanoscale Adv., 2019, 1, 3372 DOI: 10.1039/C9NA00393B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements