Issue 7, 2019

Electrochemical modulation of plasmon-induced charge separation behaviour at Au–TiO2 photocathodes

Abstract

Plasmon-induced charge separation (PICS) at the interface between a plasmonic nanoparticle and a semiconductor becomes less efficient as the plasmon resonance wavelength increases, because the energy of a photon may not be sufficiently higher than the interfacial Schottky barrier height. In this study, we developed PICS photocathodes by coating Au nanoparticles of different sizes on an ITO electrode with a thin TiO2 layer, and applied negative potentials to those photocathodes so as to suppress back electron transfer and improve the PICS photocurrent responses. The photocurrent enhancement factor was increased as the particle size was decreased, and enhancement of about two orders of magnitude was observed for small Au nanoparticles when bias voltage of 0.5 V was applied. In some cases the photocurrent enhancement was accompanied by a slight redshift of the photocurrent peak, which was caused by a lowered barrier. This technique would be useful for tuning the photocurrents when it is applied to devices such as electrochemical LSPR sensors and photodetectors.

Graphical abstract: Electrochemical modulation of plasmon-induced charge separation behaviour at Au–TiO2 photocathodes

Supplementary files

Article information

Article type
Paper
Submitted
27 Feb 2019
Accepted
30 Apr 2019
First published
01 May 2019

Photochem. Photobiol. Sci., 2019,18, 1727-1731

Electrochemical modulation of plasmon-induced charge separation behaviour at Au–TiO2 photocathodes

K. Akiyoshi and T. Tatsuma, Photochem. Photobiol. Sci., 2019, 18, 1727 DOI: 10.1039/C9PP00098D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements