Issue 37, 2019

Association of liquid-assisted grinding with aging accelerates the inherently slow slipping-on of a dibenzo-24-crown-8 over the N-hydroxysuccinimide ester of an ammonium-containing thread

Abstract

Solvent-free and solvent-less slipping-on of the dibenzo-24-crown-8 (DB24C8) over the N-hydroxysuccinimide end of an ammonium-containing thread has been studied and compared to the same reaction operated in solution. Slippage proved to be possible in solvent-free conditions, but the fastest slippage was obtained under heating when preliminary Liquid-Assisted Grinding (LAG) conditions were applied to the reactants followed by aging under an atmosphere of acetonitrile.

Graphical abstract: Association of liquid-assisted grinding with aging accelerates the inherently slow slipping-on of a dibenzo-24-crown-8 over the N-hydroxysuccinimide ester of an ammonium-containing thread

Supplementary files

Article information

Article type
Paper
Submitted
03 Jul 2019
Accepted
05 Jul 2019
First published
11 Jul 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 21587-21590

Association of liquid-assisted grinding with aging accelerates the inherently slow slipping-on of a dibenzo-24-crown-8 over the N-hydroxysuccinimide ester of an ammonium-containing thread

B. Riss-Yaw, T. Métro, F. Lamaty and F. Coutrot, RSC Adv., 2019, 9, 21587 DOI: 10.1039/C9RA05045K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements