Issue 48, 2019, Issue in Progress

A novel ratiometric AIEE/ESIPT probe for palladium species detection with ultra-sensitivity

Abstract

Existing fluorescent probes for palladium (Pd) species detection have revealed their vulnerabilities, such as low sensitivity, poor anti-interference ability and long reaction time. In order to develop a faster and more accurate detection method for palladium species at extremely low concentrations, in this study, we designed a novel ratiometric AIEE/ESIPT probe (HPNI-1) based on the Tsuji–Trost reaction for Pd. According to the data obtained, the probe was able to detect Pd species with an ultra-high anti-interference ability (Pd : other metals = 1 : 1000), rapid detection time (within 2 minute) and ratiometric fluorescent signal changes with a 1.34 nM detection limit. This study not only proves that existing methods can be improved but also provides future prospects for HPNI-1 as one of the greatest probes for Pd species detection.

Graphical abstract: A novel ratiometric AIEE/ESIPT probe for palladium species detection with ultra-sensitivity

Supplementary files

Article information

Article type
Paper
Submitted
04 Aug 2019
Accepted
22 Aug 2019
First published
04 Sep 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 27937-27944

A novel ratiometric AIEE/ESIPT probe for palladium species detection with ultra-sensitivity

Z. Xu, M. Zhang, R. Zhang, S. Liu and Y. Yang, RSC Adv., 2019, 9, 27937 DOI: 10.1039/C9RA06046D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements