Issue 28, 2019

Pseudo-capacitive behavior induced dual-ion hybrid deionization system based on Ag@rGO‖Na1.1V3O7.9@rGO

Abstract

To break the limitation of salt removal capacity of capacitive desalination (CDI), a novel dual-ion hybrid CDI (Di-HCDI) system is proposed which is composed of Na1.1V3O7.9@reduced graphene oxide (NVO@rGO) acting as the sodium ion intercalation electrode while Ag@rGO served as the chloride ion intercalation electrode. Once a direct voltage is applied, the faradaic redox reactions trigger on both electrodes, resulting in sodium ions and chloride ions being removed from the salty electrolyte. NVO exhibits a ribbon structure, having a high sodium intercalation capacity. By coupling with rGO, an ion conductor network is introduced, providing high sodium ion mobility as well as improving the structural stability due to the flexibility of rGO. As a result, the Ag@rGO‖NVO@rGO device demonstrates a superior desalination performance, i.e. ultra-high desalination capacity, rate capability and regeneration. When it was operated in NaCl solution with an initial concentration of 2000 mg L−1 at 1.4 V, the salt removal capacity was 82.2 mg g−1. Remarkably, the charge efficiency of the Ag@rGO‖NVO@rGO device reached 94.4% even in highly concentrated brine, indicating the co-ion effect has been restricted. Benefiting from this, the system proves a Di-HCDI strategy which reveals advances over most of the current CDIs.

Graphical abstract: Pseudo-capacitive behavior induced dual-ion hybrid deionization system based on Ag@rGO‖Na1.1V3O7.9@rGO

Supplementary files

Article information

Article type
Paper
Submitted
04 Apr 2019
Accepted
21 Jun 2019
First published
21 Jun 2019

J. Mater. Chem. A, 2019,7, 16892-16901

Pseudo-capacitive behavior induced dual-ion hybrid deionization system based on Ag@rGO‖Na1.1V3O7.9@rGO

Z. Yue, Y. Ma, J. Zhang and H. Li, J. Mater. Chem. A, 2019, 7, 16892 DOI: 10.1039/C9TA03570B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements