Issue 8, 2020

Direct analysis in real time coupled with quadrupole-Orbitrap high-resolution mass spectrometry for rapid analysis of pyrethroid preservatives in wooden food contact materials

Abstract

A methodology is presented for the determination of four pyrethroid (PYR) preservatives in wooden food contact materials (FCMs) using direct analysis in real time (DART) coupled with quadrupole-Orbitrap high-resolution mass spectrometry (Q-Orbitrap HRMS). The sampling mode and critical parameters of the DART-Q-Orbitrap HRMS protocol were systematically investigated. Good linearity was achieved for the four analytes with correlation coefficients all greater than 0.99. The limits of detection (LODs) and limits of quantitation (LOQs) of the method were in the range of 0.04–0.20 mg kg−1 and 0.10–0.50 mg kg−1, respectively. The mean recoveries ranged from 72.1% to 82.7% with relative standard deviations (RSDs) from 5.2% to 11.8% at three spiked levels. The developed method was proved to be suitable for rapid screening of PYRs in complex wooden FCM samples to ensure product safety and consumer health.

Graphical abstract: Direct analysis in real time coupled with quadrupole-Orbitrap high-resolution mass spectrometry for rapid analysis of pyrethroid preservatives in wooden food contact materials

Supplementary files

Article information

Article type
Communication
Submitted
27 Dec 2019
Accepted
18 Feb 2020
First published
19 Feb 2020

Analyst, 2020,145, 2892-2896

Direct analysis in real time coupled with quadrupole-Orbitrap high-resolution mass spectrometry for rapid analysis of pyrethroid preservatives in wooden food contact materials

X. Meng, Y. Lv, Q. Lv, Y. Deng, H. Bai and Q. Ma, Analyst, 2020, 145, 2892 DOI: 10.1039/C9AN02619C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements