Issue 12, 2020

Manufacturing pure cellulose films by recycling ionic liquids as plasticizers

Abstract

Because of the insoluble and infusible properties of cellulose, it is difficult to directly apply cellulose in the manufacture of pure cellulose films (PCFs). Although progress has been achieved in developing eco-friendly fabrication methods including chemical modifications, wet process or thermoplastic process in recent decades, their extreme dependence on a large amount of solvents makes it impossible to attain green manufacturing due to the production of waste liquids and by-products. Herein, by recycling green ionic liquids (ILs) as cellulose plasticizers, a green manufacturing strategy was investigated, in which PCFs, which can be used as flexible cellulose electronic substrates, were successfully manufactured. The results indicated that the properties and structures of PCFs and ILs were essentially unchanged after four cycles; meanwhile, ILs were almost completely recycled and maintained high quality. Compared with the tensile strength of 84.3 MPa and the maximum transmittance of 64.8% of the original PCFs, the mechanical and optical performances of PCFs remained at 83.0 MPa and 64.4% after four cycles, respectively. Moreover, the recovery rates of ILs were higher than 95.0 wt%. Therefore, this study opens a green manufacturing window, which promotes the industrialization of cellulose processing using ILs and the cellulose electronic substrates to substitute the existing artificial polymer electronic substrates.

Graphical abstract: Manufacturing pure cellulose films by recycling ionic liquids as plasticizers

Supplementary files

Article information

Article type
Paper
Submitted
06 Jan 2020
Accepted
07 May 2020
First published
07 May 2020

Green Chem., 2020,22, 3835-3841

Manufacturing pure cellulose films by recycling ionic liquids as plasticizers

L. Li, Y. Zhang, Y. Sun, S. Sun, G. Shen, P. Zhao, J. Cui, H. Qiao, Y. Wang and H. Zhou, Green Chem., 2020, 22, 3835 DOI: 10.1039/D0GC00046A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements