Issue 7, 2020

Beam generation and structural optimization of size-selected Au923 clusters

Abstract

A size-selected beam of Au923±20 clusters is generated in a gas-phase condensation cluster source equipped with a lateral time-of-flight mass selector. The beam current reaches up to 9.13 nA for small clusters and 80 pA for Au923±20 clusters, which are then analyzed using a scanning transmission electron microscope. Four types of metastable structures are observed for the Au923±20 clusters, including ino-decahedron (Dh), cuboctahedron and icosahedron (Ih). The proportion of bulk-favorable cuboctahedron (i.e. face center cubic (Fcc)) structure takes up only 10–20%, while the penta-rotating symmetrical structures (Dh/Ih) are the dominant ones which take up over three quarters. Changing the beam condition may optimize the clusters from Dh-dominant to the Ih-dominant phase, which paves the way towards nanoparticle control beyond the diameters.

Graphical abstract: Beam generation and structural optimization of size-selected Au923 clusters

Article information

Article type
Communication
Submitted
17 Apr 2020
Accepted
18 May 2020
First published
18 May 2020
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2020,2, 2720-2725

Beam generation and structural optimization of size-selected Au923 clusters

S. Lu, K. Hu, Z. Zuo, S. Hu, G. Wang, F. Song and L. Cao, Nanoscale Adv., 2020, 2, 2720 DOI: 10.1039/D0NA00304B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements