Issue 9, 2020

Fabrication of a graphene layer probe to measure force interactions in layered heterojunctions

Abstract

Layered heterojunctions have been widely used as two-dimensional (2D) semiconductors with unique electronic and optical properties recently. However, the force interactions in layered heterojunctions have been seldom studied. In this study, we propose a simple method to fabricate a graphene layer probe (GLP) to measure the force interactions in layered heterojunctions by atomic force microscope (AFM). The graphene layer probe was formed by attaching a multilayer graphene nanoflake onto a silica microsphere that had been glued to the AFM cantilever under an optical microscope. The frictional, normal, and adhesive forces between the graphene layer probe and four different 2D layered materials (HOPG, h-BN, MoS2, and WS2) were measured. Superlubricity was achieved at these layered heterojunctions with friction coefficients varying from 0.0005 (GLP/HOPG) to 0.003 (GLP/WS2). The variations of friction, adhesion, and van der Waals (vdW) interaction were consistent with the variations of the interlayer shear stress, the surface energy of the composed 2D layered materials, and the Hamaker constant of the heterojunctions, respectively. The good agreement between the measurements and theories confirms that this method is reliable for the fabrication of graphene or other 2D layered material probes and can be widely used for layered heterojunction measurements.

Graphical abstract: Fabrication of a graphene layer probe to measure force interactions in layered heterojunctions

Supplementary files

Article information

Article type
Paper
Submitted
08 Nov 2019
Accepted
28 Jan 2020
First published
29 Jan 2020

Nanoscale, 2020,12, 5435-5443

Fabrication of a graphene layer probe to measure force interactions in layered heterojunctions

J. Li, J. Li, L. Jiang and J. Luo, Nanoscale, 2020, 12, 5435 DOI: 10.1039/C9NR09528D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements