Issue 10, 2020

Revealing inhomogeneous Si incorporation into GaN at the nanometer scale by electrochemical etching

Abstract

Typical methods of doping quantification are based on spectroscopy or conductivity measurements. The spatial dopant distribution assessment with nanometer-scale precision is limited usually to one or two dimensions. Here we demonstrate an approach to detect three-dimensional dopant homogeneity in GaN:Si layers using electrochemical etching (ECE). GaN:Si layers are grown by plasma-assisted molecular beam epitaxy. Dopant incorporation is uniform when the growth front morphology is atomically flat. Non-uniform Si incorporation into GaN is observed when step-bunches are present on the surface during epitaxy. In this study we show that local Si concentration in the area of step-bunch is about three times higher than in the area between step-bunches. ECE spatial resolution in our experiment is estimated to be about 50 nm. This makes ECE a simple and quantitative probing tool for local three-dimensional conductivity homogeneity assessment. Our study proves that ECE could be important both for fundamental studies of crystal growth physics and impurity incorporation and for ion-implanted structures and post-processing device control.

Graphical abstract: Revealing inhomogeneous Si incorporation into GaN at the nanometer scale by electrochemical etching

Supplementary files

Article information

Article type
Paper
Submitted
30 Dec 2019
Accepted
10 Feb 2020
First published
13 Feb 2020

Nanoscale, 2020,12, 6137-6143

Revealing inhomogeneous Si incorporation into GaN at the nanometer scale by electrochemical etching

M. Sawicka, N. Fiuczek, H. Turski, G. Muziol, M. Siekacz, K. Nowakowski-Szkudlarek, A. Feduniewicz-Żmuda, P. Wolny and C. Skierbiszewski, Nanoscale, 2020, 12, 6137 DOI: 10.1039/C9NR10968D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements