Issue 5, 2020

Selective catalytic degradation of a lignin model compound into phenol over transition metal sulfates

Abstract

Transition metal salts were employed as the catalysts to improve the selective degradation of the α-O-4 lignin model compound (benzyl phenyl ether (BPE)) in the solvothermal system. The results concluded that most of the transition metal salts could enhance BPE degradation. Among which, NiSO4·6H2O exhibited the highest performance on BPE degradation (90.8%) for 5 h and phenol selectivity (53%) for 4 h at 200 °C. In addition, the GC-MS analysis indicated that the intermediates during BPE degradation included a series of aromatic compounds, such as phenol, benzyl methyl ether and benzyl alcohol. Furthermore, the mechanisms for BPE degradation and phenol selectivity in the NiSO4·6H2O system involved the synergetic effects between the acid catalysis and coordination catalysis, which caused the effective and selective cleavage of the C–O bonds.

Graphical abstract: Selective catalytic degradation of a lignin model compound into phenol over transition metal sulfates

Supplementary files

Article information

Article type
Paper
Submitted
20 Nov 2019
Accepted
09 Jan 2020
First published
16 Jan 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 3013-3019

Selective catalytic degradation of a lignin model compound into phenol over transition metal sulfates

M. Wu, J. Lin, Z. Xu, T. Hua, Y. Lv, Y. Liu, R. Pei, Q. Wu and M. Liu, RSC Adv., 2020, 10, 3013 DOI: 10.1039/C9RA09706F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements