Issue 16, 2020, Issue in Progress

An integrated electrode based on nanoflakes of MoS2 on carbon cloth for enhanced lithium storage

Abstract

Due to its high specific capacity (in theory), molybdenum disulfide (MoS2) has been recognized as a plausible substitute in lithium-ion batteries (LIBs). However, it suffers from an inferior electric conductivity and a substantial volume change during Li+ insertion/extraction. By using a facile hydrothermal method, a flexible free-standing MoS2 electrode has here been fabricated onto a carbon cloth substrate. The grafting of ultrathin MoS2 nanoflakes onto the carbon cloth framework (forming CC@MoS2), was shown to facilitate an improved electron transport, as well as an enhanced Li+ transport. As expected, the as-obtained CC@MoS2 electrode was observed to exhibit an excellent lithium storage performance. It delivers a high discharge specific capacity of 2.42 mA h cm−2 at 0.7 mA cm−2 (even after 100 cycles), which is an impressive result.

Graphical abstract: An integrated electrode based on nanoflakes of MoS2 on carbon cloth for enhanced lithium storage

Supplementary files

Article information

Article type
Paper
Submitted
20 Dec 2019
Accepted
22 Feb 2020
First published
05 Mar 2020
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2020,10, 9335-9340

An integrated electrode based on nanoflakes of MoS2 on carbon cloth for enhanced lithium storage

Y. Guo, S. Li, Q. Fang, J. Zuo, M. Liu and J. Zhang, RSC Adv., 2020, 10, 9335 DOI: 10.1039/C9RA10756H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements