Issue 11, 2020

Graphene encapsulated metallic state Ce2Sn2O7 as a novel anode material for superior lithium-ion batteries and capacitors

Abstract

The development of bimetallic-based ternary materials (BTMs) has attracted much attention due to their multi-component flexibility and synergistic effect. Herein, BTM (Ce2Sn2O7) nanoparticles are encapsulated into graphene (Ce2Sn2O7/RGO), which served as a novel anode material for lithium-ion batteries and capacitors (LIBs/LICs). Benefiting from the synergistic effects from two metal elements and the conductive networks of graphene, the optimized Ce2Sn2O7/RGO delivers a reversible capacity of 814.6 mA h g−1 at 0.05 A g−1, good cycling performance with a reversible capacity of 369.5 mA h g−1 after 1500 cycles at 1 A g−1 and a superior rate capability of 432.4 mA h g−1 at 2 A g−1 in Li+ half cells. Meanwhile, the detailed phase transition and kinetics analysis as well as the theoretical calculation are performed to investigate the reaction mechanisms behind the good electrochemical performance. Furthermore, the Ce2Sn2O7/RGO also shows good lithium-ion full cell and capacitor performances coupled with commercial LiCoO2 and activated carbon, respectively, which further demonstrates the application prospect of Ce2Sn2O7/RGO.

Graphical abstract: Graphene encapsulated metallic state Ce2Sn2O7 as a novel anode material for superior lithium-ion batteries and capacitors

Supplementary files

Article information

Article type
Paper
Submitted
29 Nov 2019
Accepted
09 Feb 2020
First published
10 Feb 2020

J. Mater. Chem. A, 2020,8, 5517-5524

Graphene encapsulated metallic state Ce2Sn2O7 as a novel anode material for superior lithium-ion batteries and capacitors

Q. Wu, Y. Liu, H. Wang, J. Hou, Y. Li and Q. Duan, J. Mater. Chem. A, 2020, 8, 5517 DOI: 10.1039/C9TA13086A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements