Issue 18, 2020

In situ conversion of metal (Ni, Co or Fe) foams into metal sulfide (Ni3S2, Co9S8 or FeS) foams with surface grown N-doped carbon nanotube arrays as efficient superaerophobic electrocatalysts for overall water splitting

Abstract

High-efficiency electrocatalysts at large current densities require consideration of not only the intrinsic activities but also the surface geometric structures. Here, we report a simple strategy to obtain metal sulfide (Ni3S2, Co9S8 and FeS) foams by in situ conversion of commercial Ni, Co and Fe foams through a conventional annealing reaction. Interestingly, N-doped carbon nanotubes, which are catalyzed by the corresponding metal sulfide nanocrystals, can also be obtained on the surface of the foams. The as formed Ni3S2 foams can work as bifunctional electrodes for overall water splitting with a potential of 1.5 V and 1.72 V at a current density of 10 mA cm−2 and 100 mA cm−2, respectively, which are comparable to the state-of-the-art transition-metal-sulfide-based bifunctional electrocatalysts reported to date. Factors such as abundant electrocatalytic active sites and excellent conductivity contribute to the gas evolution properties of nickel sulfide foams. Interestingly, the prominent performance of the nickel sulfide foams is also due to the nanotube array coating which provides special superaerophobic structures. The unique surface geometry provides little solid–gas contact area (solid content as low as 2%) at the electrode/bubble interface, and ultrasmall gas bubbles with diameters below 100 μm can leave the surface of the electrodes with ease, which effectively reduces the bubble overpotential and greatly promotes gas evolution properties especially at high current densities. Our research provides a facile strategy to obtain superaerophobic surface geometry for in situ prepared transition metal sulfide foams, which can work as bifunctional electrocatalysts for overall water splitting at large current densities. These findings may bring new insights in the design of efficient electrocatalysts for overall water splitting.

Graphical abstract: In situ conversion of metal (Ni, Co or Fe) foams into metal sulfide (Ni3S2, Co9S8 or FeS) foams with surface grown N-doped carbon nanotube arrays as efficient superaerophobic electrocatalysts for overall water splitting

Supplementary files

Article information

Article type
Paper
Submitted
28 Feb 2020
Accepted
14 Apr 2020
First published
14 Apr 2020

J. Mater. Chem. A, 2020,8, 9239-9247

In situ conversion of metal (Ni, Co or Fe) foams into metal sulfide (Ni3S2, Co9S8 or FeS) foams with surface grown N-doped carbon nanotube arrays as efficient superaerophobic electrocatalysts for overall water splitting

M. Guo, A. Qayum, S. Dong, X. Jiao, D. Chen and T. Wang, J. Mater. Chem. A, 2020, 8, 9239 DOI: 10.1039/D0TA02337J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements