Issue 21, 2020

Synergetic enhancement of thermoelectric performance in a Bi0.5Sb1.5Te3/SrTiO3 heterostructure

Abstract

Thermoelectric devices enable a direct conversion between thermal energy and electrical energy. The maximum output power of thermoelectric devices is determined by Image ID:d0ta04296j-t1.gif, where S is the Seebeck coefficient, ΔT is the temperature difference and Rint is the internal resistance, respectively. To achieve a high output power, a large Seebeck coefficient and a small internal resistance are required. However, the intrinsic tradeoff between the Seebeck coefficient and the electrical conductivity restrains the further improvement in single thermoelectric materials. Herein, we break this restriction by utilizing the synergetic effect in a Bi0.5Sb1.5Te3/SrTiO3 heterostructure, where the reduced SrTiO3 substrate and the Bi0.5Sb1.5Te3 overlayer contribute to a large Seebeck coefficient and a small internal resistance, respectively. As a result, the output power of the Bi0.5Sb1.5Te3/SrTiO3−x heterostructure can reach up to 722 nW (ΔT = 60 K), which is approximately a 44 and 11 times enhancement compared with the individual Bi0.5Sb1.5Te3 thin film and SrTiO3 substrate, respectively. Our studies will not only provide a general guidance to design novel thermoelectric heterostructures with enhanced performance, but also help understand the modulation doping and energy filtering effects at the atomic level.

Graphical abstract: Synergetic enhancement of thermoelectric performance in a Bi0.5Sb1.5Te3/SrTiO3 heterostructure

Supplementary files

Article information

Article type
Paper
Submitted
23 Apr 2020
Accepted
04 May 2020
First published
04 May 2020

J. Mater. Chem. A, 2020,8, 10839-10844

Synergetic enhancement of thermoelectric performance in a Bi0.5Sb1.5Te3/SrTiO3 heterostructure

X. Wan, Z. Liu, L. Sun, P. Jiang and X. Bao, J. Mater. Chem. A, 2020, 8, 10839 DOI: 10.1039/D0TA04296J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements