Issue 40, 2021

Phase analysis of tungsten and phonon behavior of beryllium layers in W/Be periodic multilayers

Abstract

In periodic W/Be multilayers, thickness-dependent microstructural and phase modifications were investigated in W and Be layers. In X-ray diffraction, α-W was predominant for the ultrathin layer of W, while β-W evolved along with the α-W phase for higher film thickness. For the thicker layers, the thermodynamically metastable β-W vanished and a single well-defined preferably oriented stable α-W phase was observed. The lattice spacing revealed that these phases exist in the tensile stressed condition. With the increase in thickness of Be layers, the blueshift and narrow linewidth of the transverse optical (TO) phonon mode was observed in Raman scattering studies. However, the TO mode was redshifted and the linewidth was further narrowed consistently with an increase in the thermal annealing temperature of the multilayers. The investigation has quantified an increase in compressive strain and reduction of defects with an increase in thickness of the Be layers. However, for thermally annealed samples, the compressive strain in the Be layers was relaxed and crystalline quality was improved.

Graphical abstract: Phase analysis of tungsten and phonon behavior of beryllium layers in W/Be periodic multilayers

Article information

Article type
Paper
Submitted
22 Jun 2021
Accepted
21 Sep 2021
First published
21 Sep 2021

Phys. Chem. Chem. Phys., 2021,23, 23303-23312

Phase analysis of tungsten and phonon behavior of beryllium layers in W/Be periodic multilayers

N. Kumar, R. S. Pleshkov, A. V. Nezhdanov, P. A. Yunin, V. N. Polkovnikov, N. I. Chkhalo and A. I. Mashin, Phys. Chem. Chem. Phys., 2021, 23, 23303 DOI: 10.1039/D1CP02815D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements