Issue 44, 2021

Dual-phase glass ceramics for dual-modal optical thermometry through a spatial isolation strategy

Abstract

Glass ceramics (GCs) can be an ideal medium for dopant spatial isolation, avoiding the adverse energy transfer process. Herein, a spatial isolation strategy is proposed and fulfilled by dual-phase GCs. Structural characterization performed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and selected area electron diffraction (SAED), verified the successful dual-phase precipitation of tetragonal LiYF4 and cubic ZnAl2O4 nanocrystals (NCs) among aluminosilicate glasses. Impressively, it is evidenced that intense blue upconversion (UC) emission of Tm3+ and deep red DS emission can be attained simultaneously upon 980 nm NIR and 400 nm violet light excitation, respectively, owing to the extremely suppressed adverse energy transfer process between physically separated Tm3+ and Cr3+. This also suggests the partition of Yb3+ and Tm3+ into LiYF4 and Cr3+ into ZnAl2O4 respectively. In particular, optical thermometry based on the fluorescence intensity ratio (FIR) of Tm3+ and fluorescence lifetime of Cr3+ of dual-phase GCs were also performed in detail, with the maximum relative sensitivity of 1.87% K−1 at 396 K and 0.81% K−1 at 503 K, respectively. As a consequence, such a spatial isolation strategy would provide a convenient route for application in optical thermometry and extend the practical application of GC materials.

Graphical abstract: Dual-phase glass ceramics for dual-modal optical thermometry through a spatial isolation strategy

Article information

Article type
Paper
Submitted
16 Sep 2021
Accepted
18 Oct 2021
First published
19 Oct 2021

Dalton Trans., 2021,50, 16223-16232

Dual-phase glass ceramics for dual-modal optical thermometry through a spatial isolation strategy

X. Li, Y. Chen, T. Yang, Y. Zhu, Q. Mao, J. Zhong and S. Li, Dalton Trans., 2021, 50, 16223 DOI: 10.1039/D1DT03154F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements