Issue 22, 2021, Issue in Progress

Large magnetodielectric response of PST/LSMO/LCMO film over a wide temperature range

Abstract

Pb0.6Sr0.4TiO3/La0.7Sr0.3MnO3/La0.7Ca0.3MnO3 (PST/LSMO/LCMO) film is grown on Si substrate by chemical solution deposition method. The film crystallizes perfectly into perovskite phases with a random crystalline orientation. The La0.7Sr0.3MnO3/La0.7Ca0.3MnO3/Si layer exhibits low resistivity and obvious negative magnetoresistivity (MR); the PST/LSMO/LCMO film shows notable magnetocapacitance (MC) above 350 K, from 102.9% to 29.5%. Near room temperature, there is no distinguished magnetoelectric coupling; the MC is 34.3% @ 250 K, 29.5% @ 300 K and 32.8% @ 350 K respectively. The mechanism can be explained in light of the Maxwell–Wagner (MW) model and the enhanced MR origin from the successive mixed manganite phases and spin dependent tunneling across the junctions of PST/LSMO/LCMO. This work provides a new approach for designing and developing novel composites with promising MC.

Graphical abstract: Large magnetodielectric response of PST/LSMO/LCMO film over a wide temperature range

Article information

Article type
Paper
Submitted
26 Jan 2021
Accepted
25 Mar 2021
First published
07 Apr 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 13175-13182

Large magnetodielectric response of PST/LSMO/LCMO film over a wide temperature range

Y. Chen, F. Xue, Z. Zhou, G. Wang, W. Wang, X. Dong, L. Wu and Z. Song, RSC Adv., 2021, 11, 13175 DOI: 10.1039/D1RA00689D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements