Issue 30, 2021, Issue in Progress

Improved energy storage performance of PbZrO3 antiferroelectric thin films crystallized by microwave radiation

Abstract

Energy storage dielectric capacitors based on a physical charge-displacement mechanism have attracted much attention due to their high power density and fast charge–discharge characteristics. How to improve the energy storage capacity of dielectric materials has become an important emerging research topic. Here, antiferroelectric PbZrO3 films were prepared by chemical solution deposition on Pt/Ti/SiO2/Si substrates and crystallized by microwave radiation. The effects of microwave radiation on the antiferroelectric properties and energy storage performance were investigated. In contrast to ordinary heating, microwave radiation can crystallize the amorphous PbZrO3 films into the perovskite phase at 750 °C in only 180 seconds. The PbZrO3 films have a highly (100)-preferred orientation and dense microstructure, which is beneficial to enhance the stability of antiferroelectric phase and the electric breakdown strength. The PbZrO3 films show a recoverable energy storage density of 14.8 J cm−3 at 740 kV cm−1, which is approximately 40% higher than that of the PbZrO3 films crystallized by ordinary heating. The results reveal that microwave radiation is an effective method to improve energy storage performance of antiferroelectric films.

Graphical abstract: Improved energy storage performance of PbZrO3 antiferroelectric thin films crystallized by microwave radiation

Article information

Article type
Paper
Submitted
13 Feb 2021
Accepted
12 May 2021
First published
21 May 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 18387-18394

Improved energy storage performance of PbZrO3 antiferroelectric thin films crystallized by microwave radiation

Y. Fang, Y. Bai, Y. Z. Li, N. Liu, F. Zhang, C. Wang and Z. J. Wang, RSC Adv., 2021, 11, 18387 DOI: 10.1039/D1RA01203G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements