Issue 31, 2021, Issue in Progress

Oxide-based catalysis: tailoring surface structures via organic ligands and related interfacial charge carrier for environmental remediation

Abstract

Hierarchical nanostructures and the effects of ligands on their structure formation were investigated. Morphological analysis showed the change in the morphology from nanospindles to hollow hexagonal nanodisks with the change in ligands. Structural analysis exhibited the formation of both hexagonal ZnO and monoclinic CuO structures in the composition. The elemental composition confirms the presence of CuO and ZnO in the composition. An ultra-fast degradation was achieved for the nanocomposites. The ZnO/CuO composite with ethylenediamine showed the best activity by degrading 98.77% of the methylene blue dye in 36 min. A possible photocatalytic mechanism is proposed.

Graphical abstract: Oxide-based catalysis: tailoring surface structures via organic ligands and related interfacial charge carrier for environmental remediation

Article information

Article type
Paper
Submitted
06 Mar 2021
Accepted
25 Mar 2021
First published
28 May 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 19059-19069

Oxide-based catalysis: tailoring surface structures via organic ligands and related interfacial charge carrier for environmental remediation

S. Harish, S. Athithya, V. Shivani, S. Ponnusamy, M. Shimomura, J. Archana and M. Navaneethan, RSC Adv., 2021, 11, 19059 DOI: 10.1039/D1RA01782A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements