Issue 54, 2021

Improving the capacity of zinc-ion batteries through composite defect engineering

Abstract

Aqueous zinc-ion batteries (ZIB) are favored because of their low cost and high safety. However, as the most widely used cathodes, the rate performance and long-term cycle performance of manganese-based oxides are very worrying, which greatly affects their commercialization. Here, MnO2 with composite defects of cation doping and oxygen vacancies was synthesized for the first time. Cation doping promoted the diffusion and transport of H+ and oxygen vacancies weakened the zinc–oxygen bond, allowing more electrons to be added to the charge and discharge process. The combination of these makes α-MnO2 obtain a specific capacity of up to 346 mA h g−1. This inspired us to use different combinations of defect engineering strategies on the materials which can be implemented as a potential method to improve performance for the modification of ZIB cathode materials, such as cation vacancies and anion doping.

Graphical abstract: Improving the capacity of zinc-ion batteries through composite defect engineering

Supplementary files

Article information

Article type
Paper
Submitted
29 Jul 2021
Accepted
12 Oct 2021
First published
20 Oct 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 34079-34085

Improving the capacity of zinc-ion batteries through composite defect engineering

J. Huang, Y. Cao, M. Cao and J. Zhong, RSC Adv., 2021, 11, 34079 DOI: 10.1039/D1RA05775H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements