Issue 53, 2021

Phase relations, and mechanical and electronic properties of nickel borides, carbides, and nitrides from ab initio calculations

Abstract

Based on density functional theory and the crystal structure prediction methods, USPEX and AIRSS, stable intermediate compounds in the Ni–X (X = B, C, and N) systems and their structures were determined in the pressure range of 0–400 GPa. It was found that in the Ni–B system, in addition to the known ambient-pressure phases, the new nickel boride, Ni2B3-Immm, stabilizes above 202 GPa. In the Ni–C system, Ni3C-Pnma was shown to be the only stable nickel carbide which stabilizes above 53 GPa. In the Ni–N system, four new phases, Ni6N-R[3 with combining macron], Ni3N-Cmcm, Ni7N3-Pbca, and NiN2-Pa[3 with combining macron], were predicted. For the new predicted phases enriched by a light-element, Ni2B3-Immm and NiN2-Pa[3 with combining macron], mechanical and electronic properties have been studied.

Graphical abstract: Phase relations, and mechanical and electronic properties of nickel borides, carbides, and nitrides from ab initio calculations

Supplementary files

Article information

Article type
Paper
Submitted
14 Aug 2021
Accepted
06 Oct 2021
First published
15 Oct 2021
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2021,11, 33781-33787

Phase relations, and mechanical and electronic properties of nickel borides, carbides, and nitrides from ab initio calculations

N. E. Sagatov, A. U. Abuova, D. N. Sagatova, P. N. Gavryushkin, F. U. Abuova and K. D. Litasov, RSC Adv., 2021, 11, 33781 DOI: 10.1039/D1RA06160G

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements