Issue 38, 2022

Drastic evolution of point defects in vertically grown ZnO nanorods induced by lithium ion implantation

Abstract

The evolution of various point defects in 100 keV lithium (Li) ion-implanted ZnO nanorods (NRs) by varying the fluences from 1 × 1014 to 7 × 1015 ions per cm2 has been investigated experimentally and using a simulation by stopping and range of ions in matter (SRIM). The X-ray photoelectron spectroscopy results indicate that the Li1+ ions have been incorporated at Zn2+ sites, which forms LiZn acceptors in the implanted NRs. The structural disorder and the number of oxygen vacancies in the implanted ZnO NRs increase drastically with an increase in the Li fluence as indicated by the X-ray diffractometry and Raman scattering analyses. Both the formation of acceptors and implantation-induced defects make the Li-implanted NRs electrically highly resistive. The yellow-orange photoluminescence (PL) emission of the as-grown ZnO NRs has evolved into green emission in the implanted NRs. A suppression of the green PL at higher fluences is possibly due to an apparent decrease in the zinc vacancy concentration. The SRIM results explain the quantitative energy loss, the distributions of the implanted Li ions and the point defects along the target ZnO NRs. The consistency between the experimental and theoretical simulations validates our analyses on the formation and evolution of various point defects in highly resistive Li-implanted ZnO NRs.

Graphical abstract: Drastic evolution of point defects in vertically grown ZnO nanorods induced by lithium ion implantation

Article information

Article type
Paper
Submitted
16 May 2022
Accepted
15 Sep 2022
First published
15 Sep 2022

Phys. Chem. Chem. Phys., 2022,24, 23858-23869

Drastic evolution of point defects in vertically grown ZnO nanorods induced by lithium ion implantation

A. Das and D. Basak, Phys. Chem. Chem. Phys., 2022, 24, 23858 DOI: 10.1039/D2CP02215J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements