Issue 10, 2022

Multi-method approach for analysis of road dust particles: elemental ratios, SP-ICP-TOF-MS, and TEM

Abstract

Road dust particles including nanoparticles (NPs), with heterogeneous composition, are significant carriers of metals/metalloids and can be further transported into the atmosphere or surface runoff. However, their elemental composition remains poorly defined. In this study, seven road dust samples were collected from different areas in Shanghai, China and were analyzed for total metal concentrations, particle elemental composition and ratios, morphology, composition, and crystalline phases. Overall, the road dust particles were characterized by high concentrations of Fe, Ti, Al, Cr, Ci, V Ni, Cu, Zn, Sn, and Sb, which varied among the samples. Four potential sources of metals were identified using PCA analysis including natural sources, exhaust and non-exhaust emissions, and vehicle electronics. The bulk elemental ratios of Ti/Nb, Ti/Al, Ti/Fe, Pb/Nb, Sn/Nb and W/Nb in the road dust samples were higher than the corresponding reference ratios indicating that the road dust was contaminated with Ti, Pb, Sn, and W. Anthropogenic Ti, Pb, Sn and W were estimated by mass balance calculation and varied between 0.25 and 1.48 × 106 μg kg−1, 0.19 and 1.21 × 105 μg kg−1, 0.98 and 4.22 × 104 μg kg−1, and 0.12 and 1.01 × 104 μg kg−1, respectively. The number concentration of NPs was determined by SP-ICP-TOF-MS and was 0.66–3.3 × 1010 particles per g for Ti-containing NPs, 0.23–1.51 × 1010 particles per g for Pb-containing NPs, 0.28–3.10 × 109 particles per g for Sn-containing NPs, and 1.34–9.38 × 108 particles per g for W-containing NPs, respectively. TEM analysis further confirmed the occurrence of both natural and anthropogenic Ti- and W-containing NPs and the contamination of Pb- and Sn-containing NPs in Shanghai road dust. These NPs could originate from the non-exhaust emission of vehicles and coal combustion. Overall, this study provides a reliable comprehensive approach for the characterization of road dust particles and new insights into the nature of Ti-, Pb-, Sn-, and W-containing particles in dust samples.

Graphical abstract: Multi-method approach for analysis of road dust particles: elemental ratios, SP-ICP-TOF-MS, and TEM

Supplementary files

Article information

Article type
Paper
Submitted
28 Apr 2022
Accepted
23 Aug 2022
First published
24 Aug 2022

Environ. Sci.: Nano, 2022,9, 3859-3872

Author version available

Multi-method approach for analysis of road dust particles: elemental ratios, SP-ICP-TOF-MS, and TEM

F. Tou, Md. M. Nabi, J. Wang, M. Erfani, E. Goharian, J. Chen, Y. Yang and M. Baalousha, Environ. Sci.: Nano, 2022, 9, 3859 DOI: 10.1039/D2EN00409G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements