Issue 20, 2022

Development of nano- and microdevices for the next generation of biotechnology, wearables and miniaturized instrumentation

Abstract

This is a short communication based on recent high-impact publications related to how various chemical materials and substrate modifications could be tuned for nano- and microdevices, where their application for high point-of-care bioanalysis and further applications in life science is discussed. Hence, they have allowed different high-impact research topics in a variety of fields, from the control of nanoscale to functional microarchitectures embedded in various support materials to obtain a device for a given application or use. Thus, their incorporation in standard instrumentation is shown, as well as in new optical setups to record different classical and non-classical light, signaling, and energy modes at a variety of wavelengths and energy levels. Moreover, the development of miniaturized instrumentation was also contemplated. In order to develop these different levels of technology, the chemistry, physics and engineering of materials were discussed. In this manner, a number of subjects that allowed the design and manufacture of devices could be found. The following could be mentioned by way of example: (i) nanophotonics; (ii) design, synthesis and tuning of advanced nanomaterials; (iii) classical and non-classical light generation within the near field; (iv) microfluidics and nanofluidics; (v) signal waveguiding; (vi) quantum-, nano- and microcircuits; (vii) materials for nano- and microplatforms, and support substrates and their respective modifications for targeted functionalities. Moreover, nano-optics in in-flow devices and chips for biosensing were discussed, and perspectives on biosensing and single molecule detection (SMD) applications. In this perspective, new insights about precision nanomedicine based on genomics and drug delivery systems were obtained, incorporating new advanced diagnosis methods based on lab-on-particles, labs-on-a-chip, gene therapies, implantable devices, portable miniaturized instrumentation, single molecule detection for biophotonics, and neurophotonics. In this manner, this communication intends to highlight recent reports and developments of nano- and microdevices and further approaches towards the incorporation of developments in nanophotonics and biophotonics in the design of new materials based on different strategies and enhanced techniques and methods. Recent proofs of concept are discussed that could allow new substrates for device manufacturing. Thus, physical phenomena and materials chemistry with accurate control within the nanoscale were introduced into the discussion. In this manner, new potential sources of ideas and strategies for the next generation of technology in many research and development fields are showcased.

Graphical abstract: Development of nano- and microdevices for the next generation of biotechnology, wearables and miniaturized instrumentation

Article information

Article type
Review Article
Submitted
28 Mar 2022
Accepted
15 Apr 2022
First published
27 Apr 2022
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2022,12, 12806-12822

Development of nano- and microdevices for the next generation of biotechnology, wearables and miniaturized instrumentation

L. R. Gomez Palacios and A. G. Bracamonte, RSC Adv., 2022, 12, 12806 DOI: 10.1039/D2RA02008D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements