Issue 17, 2022

Largely improved generating energy density, efficiency, and fatigue life of DEG by designing TiO2/LNBR/SiR DE composites with a self-assembled structure

Abstract

Dielectric elastomer generators (DEGs) can easily harvest electrical energy from mechanical energy including ocean waves and human motion. A key bottleneck restricting the development of DEG is the lack of dielectric elastomer (DE) materials with simultaneously good dielectric, elasticity and mechanical properties. In this study, silicone rubber (SiR) DE composites for DEG with high energy density (w), high power conversion efficiency (PCE) and high fatigue life (NFL) were designed and prepared by simultaneously introducing low content of liquid acrylonitrile-butadiene rubber (LNBR) and titanium dioxide (TiO2) into SiR. The hydrogen bonding interaction between LNBR and TiO2 results in the self-assembly of LNBR on TiO2 particles (LNBR@TiO2). The as-prepared TiO2/LNBR/SiR DE composites with a self-assembled structure show the following advantages: maintaining high electrical insulation and breakdown strength (Eb) and high elasticity, significantly increasing the dielectric constant (εr) by both strong dipole polarizability of LNBR and interfacial polarizability of LNBR@TiO2, and largely increasing the elongation at break and tensile toughness by the strong interfacial interaction and the “plasticizing effect” of LNBR. Using TiO2/LNBR/SiR DE composites as the substrate of DEG, an up-to-date highest w (62.1 mJ cm−3) of DEG using an unprestretched DE film was obtained, and the fatigue life (NFL) of our DEG (42 000 times) is much higher than that of the VHB DEG (approximately 500 times). The high w and long NFL result in a high full-life energy density of approximately 1083 J cm−3, 361 times that of the VHB DEG. In addition, the PCE of our DEG (28.6%) is much higher than that of the VHB DEG (13.7%). The relationship between microstructure and energy harvesting performance was revealed.

Graphical abstract: Largely improved generating energy density, efficiency, and fatigue life of DEG by designing TiO2/LNBR/SiR DE composites with a self-assembled structure

Supplementary files

Article information

Article type
Paper
Submitted
04 Jan 2022
Accepted
10 Mar 2022
First published
10 Mar 2022

J. Mater. Chem. A, 2022,10, 9524-9534

Largely improved generating energy density, efficiency, and fatigue life of DEG by designing TiO2/LNBR/SiR DE composites with a self-assembled structure

X. Hao, X. Liu, Y. Jiang, C. Wang, H. Sun, W. Zang, N. Ning, M. Tian and L. Zhang, J. Mater. Chem. A, 2022, 10, 9524 DOI: 10.1039/D2TA00066K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements