Issue 4, 2022

A mixed-dimensional WS2/GaSb heterojunction for high-performance p–n diodes and junction field-effect transistors

Abstract

GaSb nanowires integrated on a silicon-based substrate are of great significance for p-type field-effect transistors. In particular, chips are becoming more and more miniaturized, and complicated dielectric engineering needs to be avoided. Therefore, the introduction of junction field-effect transistor (JFET) can be used to improve the performance of transistors. We demonstrated a heterostructure p-channel depletion type GaSb junction field-effect transistor by combining with n-WS2 sheets. Typical diode characteristics are observed in n-WS2/p-GaSb heterostructure diodes, with a high rectification ratio of ∼104. The JFET has excellent electrical features with an ON/OFF ratio of ∼104 and the sub-threshold swing (SS ≈ 723 mV dec−1). With the back gate control the ON/OFF current ratio is improved to ∼106 and the low SS is restrained to 166 mV dec−1. Moreover, due to the electrical properties of the heterojunction the JFET and p–n diodes maintain good stability at high temperatures. Therefore, the WS2/GaSb heterojunction enables the miniaturization of an integrated power electronic system and provides a promising route to low power electronics.

Graphical abstract: A mixed-dimensional WS2/GaSb heterojunction for high-performance p–n diodes and junction field-effect transistors

Supplementary files

Article information

Article type
Paper
Submitted
01 Aug 2021
Accepted
06 Dec 2021
First published
09 Dec 2021

J. Mater. Chem. C, 2022,10, 1511-1516

A mixed-dimensional WS2/GaSb heterojunction for high-performance p–n diodes and junction field-effect transistors

Z. Cheng, X. Song, L. Jiang, L. Wang, J. Sun, Z. Yang, Y. Jian, S. Zhang, X. Chen and H. Zeng, J. Mater. Chem. C, 2022, 10, 1511 DOI: 10.1039/D1TC03575D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements