Issue 19, 2023

Tunable and three-dimensional dual-band metamaterial absorber based on electromagnetically induced transparency with vanadium dioxide

Abstract

A tunable and three-dimensional dual-band metamaterial absorber based on electromagnetically induced transparency (EIT) is proposed. The unit cell of the metamaterial absorber consisted of a cut wire (CW), two split ring resonators (SRRs), a metal plate and a patterned vanadium dioxide (VO2) film. The two absorption peaks could be dynamically controlled by tuning the conductivity of VO2 with the maximum absorptions of 97.5% at 1.05 THz and 96.5% at 1.16 THz. The physical mechanism of the metamaterial absorber was explained by the electric field, magnetic field, power loss density and surface current distributions. In addition, the metamaterial absorber exhibited a wide polarization angle for y-polarization wave and x-polarization wave and showed good robustness against oblique incidence. Moreover, the metamaterial absorber exhibited a high fault tolerance with a variation in the geometric parameters. Our work provides a novel method for the fabrication of multi-band metamaterial absorbers and has promising applications in terahertz sensors, modulators and filters.

Graphical abstract: Tunable and three-dimensional dual-band metamaterial absorber based on electromagnetically induced transparency with vanadium dioxide

Article information

Article type
Paper
Submitted
31 Mar 2023
Accepted
25 Apr 2023
First published
09 May 2023

Phys. Chem. Chem. Phys., 2023,25, 13393-13398

Tunable and three-dimensional dual-band metamaterial absorber based on electromagnetically induced transparency with vanadium dioxide

M. Chen and X. Yang, Phys. Chem. Chem. Phys., 2023, 25, 13393 DOI: 10.1039/D3CP01475D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements