Issue 4, 2023

3D printed triply periodic minimal surfaces as advanced structured packings for solvent-based CO2 capture

Abstract

Point-source CO2 capture is a critical technology for industrial decarbonization and certain CO2 removal processes. Solvent-based CO2 absorption is a mature process, but the capital investment and energy requirements are substantial, especially when economic drivers for its deployment are tenuous. We utilized additive manufacturing and computational fluid dynamics to screen and prototype structured packings in the vast design space accessible via advanced manufacturing and computer-aided design. 3D-printed triply periodic minimal surfaces (TPMS) were tested as advanced packing geometries for CO2 capture from simulated flue gas (10% CO2) and evaluated alongside a representative industrial packing geometry, Mellapak 250Y. 1D model fits of experimental absorption data revealed 49–61% increases in mass transfer performance (kLaeff) and 91–140% increases in effective gas–liquid interfacial area in TPMS packings (Gyroid and Schwarz-D) compared to 250Y. These advanced structured packings also featured similar or better maximum fluid loads and pressure drops than 250Y, reinforcing their industrial potential. Together with the capability to natively distribute fluid shown by the TPMS geometries, the performance improvements realized could reduce absorber capital costs by more than 30%.

Graphical abstract: 3D printed triply periodic minimal surfaces as advanced structured packings for solvent-based CO2 capture

Supplementary files

Article information

Article type
Paper
Submitted
12 Nov 2022
Accepted
06 Mar 2023
First published
14 Mar 2023
This article is Open Access
Creative Commons BY-NC license

Energy Environ. Sci., 2023,16, 1752-1762

3D printed triply periodic minimal surfaces as advanced structured packings for solvent-based CO2 capture

N. C. Ellebracht, P. Roy, T. Moore, A. E. Gongora, D. I. Oyarzun, J. K. Stolaroff and D. T. Nguyen, Energy Environ. Sci., 2023, 16, 1752 DOI: 10.1039/D2EE03658D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements