Issue 9, 2023

Promotion of the start-up of the anammox reactor with exogenous boron

Abstract

In this study, boron, an essential element of interspecies quorum sensing (QS) signals, was first proposed to enhance the start-up of the anaerobic ammonium oxidation (anammox) process. Exogenous boron was added into the anammox reactor, and its effect on the ammonia removal, granulation, AI-2 QS, and microbial community was examined. The results showed that the total nitrogen conversion rate in the experimental upflow anaerobic sludge blanket (UASB) with exogenous boron added (denoted as e-UASB) was 0.7 ± 0.05 kg N m−3 d−1, approximately three times that in the control UASB without boron (0.23 ± 0.05 kg N m−3 d−1, denoted as c-UASB). The exogenous addition of boron elevated the AI-2 concentration, increased the content of extracellular polymeric substances (EPS), and promoted granulation in the UASB during start-up. Microbial community analysis indicated that the abundances of anammox bacteria, i.e. Candidatus Brocadiales and Candidatus Jettenia, in the e-UASB were much higher than those in the c-UASB (25.5% vs. 19.7%). Additionally, Anaerolineaceae, which is known to play an important role in the granulation of anammox bacteria, had an abundance of 21.13% in e-UASB and 17.74% in c-UASB. It is demonstrated that exogenous boron could be promising in enhancing the start-up of an anammox reactor through promoting QS, granulation, and anammox.

Graphical abstract: Promotion of the start-up of the anammox reactor with exogenous boron

Supplementary files

Article information

Article type
Paper
Submitted
23 Mar 2023
Accepted
10 Jun 2023
First published
21 Jun 2023

Environ. Sci.: Water Res. Technol., 2023,9, 2293-2302

Promotion of the start-up of the anammox reactor with exogenous boron

H. Yu, L. Zhong, Z. Chu, G. Wu, H. Yang, H. Rong and F. Qu, Environ. Sci.: Water Res. Technol., 2023, 9, 2293 DOI: 10.1039/D3EW00192J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements