Changes in permselectivity of radiation-grafted anion-exchange membranes with different cationic headgroup chemistries are primarily due to water content differences

Abstract

In a prior paper [Bance-Soualhi et al., J. Mater. Chem. A, 2021, 9, 22025], we showed that the crosslinking of radiation-grafted anion-exchange membranes (RG-AEM) was necessary to obtain high enough apparent permselectivities for use in applications such as (reverse)electrodialysis. However, a separate result in this prior study suggested that comparable AEMs (similar ion-exchange capacity, IEC, and backbone chemistry) with different cationic headgroups may yield different balances between permselectivity and conductivity. This short follow-up study compares the permselectivities and Cl⁻ conductivities of a series of non-crosslinked RG-AEMs with either aliphatic quaternary ammonium headgroups (N-benzyl-N-methylpiperidinium, MPIP, and benzyltrimethylammonium, TMA) or aromatic cationic headgroups (N-benzylpyridinium, PYR, or 1-benzyl-2,3-dimethylimidazolium, DMI). We show that a change in the headgroup chemistry modified the permselectivity-conductivity balance of the RG-AEM, but this was primarily due to the different headgroups inducing varying intrinsic water contents: higher water content RG-AEMs yield lower permselectivites. As also expected from this water content observation, higher IEC variants yielded RG-AEMs with lower permselectivities. The addition of N,N,N′,N′-tetramethylhexane-1,6-diamine-(TMHDA)-based ionic crosslinking to a DMI-based RG-AEM also raised permselectivity, confirming the observation of the prior study also applies to aromatic headgroup RG-AEMs. In summary, high IEC AEMs containing imidazolium-type headgroups along with an optimal amount of ionic crosslinking could be promising and warrant more study (i.e. a comparison of RG-AEMs with cheaper, more scalable non-RG-analogues that contain these attributes).