Issue 12, 2023

Nanoscale friction on MoS2/graphene heterostructures

Abstract

Stacked hetero-structures of two-dimensional materials allow for a design of interactions with corresponding electronic and mechanical properties. We report structure, work function, and frictional properties of 1 to 4 layers of MoS2 grown by chemical vapor deposition on epitaxial graphene on SiC(0001). Experiments were performed by atomic force microscopy in ultra-high vacuum. Friction is dominated by adhesion which is mediated by a deformation of the layers to adapt the shape of the tip apex. Friction decreases with increasing number of MoS2 layers as the bending rigidity leads to less deformation. The dependence of friction on applied load and bias voltage can be attributed to variations in the atomic potential corrugation of the interface, which is enhanced by both load and applied bias. Minimal friction is obtained when work function differences are compensated.

Graphical abstract: Nanoscale friction on MoS2/graphene heterostructures

Supplementary files

Article information

Article type
Paper
Submitted
09 Jan 2023
Accepted
25 Feb 2023
First published
27 Feb 2023
This article is Open Access
Creative Commons BY-NC license

Nanoscale, 2023,15, 5809-5815

Nanoscale friction on MoS2/graphene heterostructures

Z. Liu, B. Szczefanowicz, J. M. J. Lopes, Z. Gan, A. George, A. Turchanin and R. Bennewitz, Nanoscale, 2023, 15, 5809 DOI: 10.1039/D3NR00138E

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements