Issue 3, 2023

Toughening polylactide with nonlinear, degradable analogues of PEG and its copolymers

Abstract

Polylactic acid (PLA) as a bio-sourced polymer has excellent tensile strength but its applications are severely limited due to its inherent brittleness. PLA can be effectively toughened with linear poly(ethylene glycol) (PEG) at the expense of elastic modulus and tensile strength. In this study, a well-defined polyester-based nonlinear PEG analogue, poly(VL-Teg), and its block copolymers, poly(VL-Teg)-b-PLA, have been facilely prepared via controlled ring-opening polymerization with a binary organocatalyst system in bulk. The homo- and co-polymers of the nonlinear PEG analogue are evaluated as toughening additives for PLA. Results reveal that non-linear analogues are effective additives for PLA toughening with a great increase of elongation at break and without a drastic loss of elastic modulus or yield strength. Compared with their linear PEG counterpart, the nonlinear PEG analogues as toughening additives are able to deliver PLA blends with more balanced mechanical properties under similar conditions. In particular, PLA melt-blended with P(VL-Teg)40-b-PLA40 (10 wt% loading) shows over 7-fold improvement in elongation at break and 9-fold higher tensile toughness than a commercial pristine PLA without a significant loss of yield strength (less than 3% reduction).

Graphical abstract: Toughening polylactide with nonlinear, degradable analogues of PEG and its copolymers

Supplementary files

Article information

Article type
Paper
Submitted
13 Oct 2022
Accepted
29 Nov 2022
First published
01 Dec 2022

Polym. Chem., 2023,14, 277-283

Toughening polylactide with nonlinear, degradable analogues of PEG and its copolymers

H. Li, Y. Yan, X. jiang, J. Lin and M. Li, Polym. Chem., 2023, 14, 277 DOI: 10.1039/D2PY01307J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements